The Tasman Range is for those looking for the horizontal look, it’s a large letterbox with no paperhole that has a simple sleek look, suiting straight walls or timber fences beautifully. Using 3mm Brushed 316 Marine Grade Stainless Steel for the face panel and a stainless steel housing insert that’s 200 or 230mm Deep housing. The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings. A lot of our clients will use the Tasman range in brick or block wall but it is the most commonly letterbox in our range that’s used for Timber and Metal fences

The TASMAN 01 is a BLANK – No Text letterbox with no paperhole, A4 letterslot in Stainless Steel

• 3mm Brushed 316 Marine Grade Stainless Steel
• 200mm or 230mm Brushed 316 Stainless Steel Housing Box (as standard)
• Face panel 450mm wide x 250mm high
• 350mm x 40mm letter slot with Rainhood
• BLANK no text or numbering
• LEAD TIME: Approx 5-7 working days

PLEASE NOTE :

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.