The Tasman Range is for those looking for the horizontal look, it’s a large letterbox with no paperhole that has a simple sleek look, suiting straight walls or timber fences beautifully. Using 3mm Brushed 316 Marine Grade Stainless Steel for the face panel and a stainless steel housing insert that’s 200 or 230mm Deep. The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings. A lot of our clients will use the Tasman range in brick or block wall but it is also the most commonly letterbox in our range that’s used for Timber and Metal fences.

The TASMAN 02 is an off-set NUMBERED letterbox with no paperhole, A4 letterslot with LASER CUT Number that’s backed with BLACK acrylic to highlight the numbering.

Picture example text is : AVANT GARDE font

  • 3mm Brushed 316 Marine Grade Stainless Steel
  • 200mm or 230mm Brushed 316 Stainless Steel Housing Box (as standard)
  • Face panel 450mm wide x 250mm high
  • 350mm x 40mm letter slot with Rainhood
  • Laser cut House NUMBER off-set to the left
  • LEAD TIME: Approx 5-7 working days

PLEASE NOTE :

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.

  • Housing Box Dimensions: 400mm wide x 200mm high x 200mm or 230mm deep 
  • Face Panel Dimension:  450mm wide x 250mm high
  • Letter Slot Dimension: 350mm x 40mm with Rainhood

SS Tasman 02

$420.00





    Font Family - Arial Bold


    Font Family - Avant Garde


    Font Family - Century Gothic


    Font Family - Grenadier

    Font Family - Times New Roman


SS Tasman 02

$420.00





    Font Family - Arial Bold


    Font Family - Avant Garde


    Font Family - Century Gothic


    Font Family - Grenadier

    Font Family - Times New Roman


The Tasman Range is for those looking for the horizontal look, it’s a large letterbox with no paperhole that has a simple sleek look, suiting straight walls or timber fences beautifully. Using 3mm Brushed 316 Marine Grade Stainless Steel for the face panel and a stainless steel housing insert that’s 200 or 230mm Deep. The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings. A lot of our clients will use the Tasman range in brick or block wall but it is also the most commonly letterbox in our range that’s used for Timber and Metal fences.

The TASMAN 02 is an off-set NUMBERED letterbox with no paperhole, A4 letterslot with LASER CUT Number that’s backed with BLACK acrylic to highlight the numbering.

Picture example text is : AVANT GARDE font

  • 3mm Brushed 316 Marine Grade Stainless Steel
  • 200mm or 230mm Brushed 316 Stainless Steel Housing Box (as standard)
  • Face panel 450mm wide x 250mm high
  • 350mm x 40mm letter slot with Rainhood
  • Laser cut House NUMBER off-set to the left
  • LEAD TIME: Approx 5-7 working days

PLEASE NOTE :

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.

  • Housing Box Dimensions: 400mm wide x 200mm high x 200mm or 230mm deep 
  • Face Panel Dimension:  450mm wide x 250mm high
  • Letter Slot Dimension: 350mm x 40mm with Rainhood