The MONUMENT Atlantic is a large rectangle face panel that makes a statement and best suited to piers 1500mm and above. Using Powdercoated Stainless Steel for the face panel and a stainless steel housing insert. The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings.

The MONUMENT ATLANTIC 01 has your NUMBER ONLY Laser cut with a black, white or stainless steel backing to highlight the text.

Picture example text is : AVANT GARDE FONT

  • 2.5mm Stainless Steel
  • Powdercoated MOUMENT SATIN face panel
  • Laser Cut Number ONLY
  • Standard Stainless steel or Powdercoated housing Insert
  • 350mm Deep Housing Box Insert as standard (other options available)
  • Face panel 300mm wide x 450mm high
  • Letterslot standard 225mm x 27.5mm letter slot
  • 225mm x 40mm letter slot with Rainhood
  • 100mm Paperhole
  • BLACK BACKING – 2mm Acrylic
  • WHITE BACKING – 0.6mm White Colourbond Sheet
  • STAINLESS STEEL BACKING – 0.7mm Brushed Stainless Steel
  • LEAD TIME: Approx 5-7 working days

PLEASE NOTE :

Text or Numbering – We will laser cut exactly as you write it (example : 32 beach road will be written all in lowercase for the text) so firstly double check your number and/or address is correct and it’s written exactly as you want it, Capital then lowercase , all caps or all lowercase

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.

  • Standard Housing Box Insert Dimensions: 230mm wide x 260mm high x 350mm deep 
  • Optional Housings depths available in 400mm, 470mm and 600mm depths
  • Face Panel Dimension:  300mm wide x 450mm high
  • Paper Hole Dimension: 95mm Diameter
  • Letter Slot Dimension: A4 – 225mm x 27.5mm standard
  • Letter Slot Dimension: 225mm x 40mm with Rainhood

MONUMENT Atlantic 01

$460.00



    • 0 $

    • $

    • 0 $

    • 0 $

    • $

    Font Family - Avant Garde


    Font Family - Arial Bold


    Font Family - Century Gothic


    Font Family - Grenadier


    Font Family - Times New Roman


    *DELIVERY

    • 25 $
    • 0 $

MONUMENT Atlantic 01

$460.00



    • 0 $

    • $

    • 0 $

    • 0 $

    • $

    Font Family - Avant Garde


    Font Family - Arial Bold


    Font Family - Century Gothic


    Font Family - Grenadier


    Font Family - Times New Roman


    *DELIVERY

    • 25 $
    • 0 $

The MONUMENT Atlantic is a large rectangle face panel that makes a statement and best suited to piers 1500mm and above. Using Powdercoated Stainless Steel for the face panel and a stainless steel housing insert. The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings.

The MONUMENT ATLANTIC 01 has your NUMBER ONLY Laser cut with a black, white or stainless steel backing to highlight the text.

Picture example text is : AVANT GARDE FONT

  • 2.5mm Stainless Steel
  • Powdercoated MOUMENT SATIN face panel
  • Laser Cut Number ONLY
  • Standard Stainless steel or Powdercoated housing Insert
  • 350mm Deep Housing Box Insert as standard (other options available)
  • Face panel 300mm wide x 450mm high
  • Letterslot standard 225mm x 27.5mm letter slot
  • 225mm x 40mm letter slot with Rainhood
  • 100mm Paperhole
  • BLACK BACKING – 2mm Acrylic
  • WHITE BACKING – 0.6mm White Colourbond Sheet
  • STAINLESS STEEL BACKING – 0.7mm Brushed Stainless Steel
  • LEAD TIME: Approx 5-7 working days

PLEASE NOTE :

Text or Numbering – We will laser cut exactly as you write it (example : 32 beach road will be written all in lowercase for the text) so firstly double check your number and/or address is correct and it’s written exactly as you want it, Capital then lowercase , all caps or all lowercase

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.

  • Standard Housing Box Insert Dimensions: 230mm wide x 260mm high x 350mm deep 
  • Optional Housings depths available in 400mm, 470mm and 600mm depths
  • Face Panel Dimension:  300mm wide x 450mm high
  • Paper Hole Dimension: 95mm Diameter
  • Letter Slot Dimension: A4 – 225mm x 27.5mm standard
  • Letter Slot Dimension: 225mm x 40mm with Rainhood