The Brass Tasman Range is for those looking for the horizontal look, it’s a large letterbox with no paperhole that has a simple sleek look, suiting straight walls or timber fences beautifully. Using 2.5mm Brass with an aged coating for the face panel along with the standard stainless steel housing insert (optional Powdercoated). The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings.

The Brass TASMAN has your NUMBER or Full  ADDRESS Laser cut to the face panel with a Black acrylic backing to highlight the text.

Picture example text is : ARIAL BOLD FONT

IMPORTANT : The aged Brass coating is applied after the face panel is laser cut and due to the fact that the raw brass colour can vary slightly and the method is hand done, slight variations to the colour and the aged coating can occur, we we do our best to match the sample pictures as close as possible.

• 2.5mm Brass
• Aged Coating
• Number or full  Address laser cut from face panel
• 2mm BLACK Acrylic Backing
• Standard Stainless steel or optional Powdercoated housing Insert
• 200mm or 230mm deep Housing Box Insert as standard
• Face panel 450mm wide x 250mm high
• Standard Letterslot with Rainhood 350mm x 40mm
• LEAD TIME: Approx 15-20 working days

PLEASE NOTE :

Text or Numbering – We will laser cut exactly as you write it (example : 32 beach road will be written all in lowercase for the text) so firstly double check your number and/or address is correct and it’s written exactly as you want it, Capital then lowercase , all caps or all lowercase

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.