The Tasman Range is for those looking for the horizontal look, it’s a large letterbox with no paperhole that has a simple sleek look, suiting straight walls or timber fences beautifully. Using Powdercoated Stainless Steel for the face panel and a stainless steel housing insert that’s 200 or 230mm Deep. The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings. A lot of our clients will use the Tasman range in brick or block wall but it is also the most commonly letterbox in our range that’s used for Timber and Metal fences.

The BLACK TASMAN 02 has your NUMBER offset to the Left hand side Laser cut with a white or stainless steel backing to highlight the text.

Picture example text is : AVANT GARDE

• 2.5mm Stainless Steel
• Powdercoated face panel
• Offset Number laser cut from face panel
• Standard Stainless steel or optional Powdercoated housing Insert
• Face panel 450mm wide x 250mm high
• Letterslot standard 350mm x 40mm letter slot
• Letterslot standard with Rainhood
• No Paperhole
• WHITE BACKING – 0.6mm White Colourbond Sheet
• STAINLESS STEEL BACKING – 0.7mm Brushed Stainless Steel
• Internal Perforated metal false floor to hold mail out of any water that may ingress
• LEAD TIME: Approx 5-7 working days

PLEASE NOTE :

Text or Numbering – We will laser cut exactly as you write it (example : 32 beach road will be written all in lowercase for the text) so firstly double check your number and/or address is correct and it’s written exactly as you want it, Capital then lowercase , all caps or all lowercase

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.