The Atkinson Letterbox is a large modern rectangle face panel accepting A4 mail with ease. Using 3mm 316 Marine Stainless Steel for the face panel and a stainless steel housing insert (optional Powdercoated). The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings but will also require some glue fixing to the overhang to mount in place.

The ATKINSON Left hand has your NUMBER & ADDRESS Laser cut on the LEFTHAND SIDE of the letterbox with a Black acrylic backing to highlight the text.

Picture example text is : AVANT GARDE FONT

• 3mm 316 Marine Grade Stainless Steel
• Brushed Finish
• Number and Address laser cut from face panel
• Standard Stainless steel or optional Powdercoated housing Insert
• Face panel 900mm wide x 250mm high
• Letterslot standard with Rainhood 350mm x 40mm
• 2mm BLACK Acrylic Backing
• LEAD TIME: Approx 5-7 working days
• As the Atkinson panel is 900mm long use the rear mounting pins into the housing insert to locate and hold the panel in place while you glue fix the panel overhang, be sure to tape or glue the panel overhang in place while the glue sets, we recommend Sodal’s T-Rex glue or Sikaflex for best results in gluing.

PLEASE NOTE :

Text or Numbering – We will laser cut exactly as you write it (example : 32 beach road will be written all in lowercase for the text) so firstly double check your number and/or address is correct and it’s written exactly as you want it, Capital then lowercase , all caps or all lowercase

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.