The ATKINSON Front Accessible Letterbox is a large modern rectangle face panel accepting A4 mail with ease. Using Stainless Steel or Powdercoated stainless steel finishes for the face panel with your Street Address laser cut to the Left or Righthand sides of the face panel. The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings but will also require some glue fixing to the overhang to mount in place.

The ATKINSON Front Accessible Letterbox has your NUMBER & ADDRESS Laser cut on the RIGHT or LEFT hand side of the panel with a black, white or stainless steel backing to highlight the text.

Picture example text is a Black Powdercoated letterbox with AVANT GARDE FONT with the standard white backing sheet

• 2.5mm Stainless Steel
• Option 316 Marine Stainless Steel
• Option Dulux Duralloy Matt Black Powdercoat
• Option Dulux Duralloy Monument Powdercoat
• Number and Address laser cut from face panel
• Stainless housing Insert
• Face panel 900mm wide x 250mm high
• Front top hinged access door with keyed lock
• Letterslot  with Rainhood 320mm x 40mm
• BLACK BACKING 2mm Black Acrylic
• WHITE BACKING – 0.6mm White Colourbond Sheet
• STAINLESS STEEL BACKING – 0.7mm Brushed Stainless Steel
• LEAD TIME: Approx 7-10 working days
• As the Atkinson panel is 900mm long use the rear mounting pins into the housing insert to locate and hold the panel in place while you glue fix the panel overhang, be sure to tape or glue the panel overhang in place while the glue sets, we recommend Sodal’s T-Rex glue or Sikaflex for best results in gluing.

PLEASE NOTE :

Text or Numbering – We will laser cut exactly as you write it (example : 32 beach road will be written all in lowercase for the text) so firstly double check your number and/or address is correct and it’s written exactly as you want it, Capital then lowercase , all caps or all lowercase

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.