The Corten Atlantic letterbox is a large rectangular face panel that best suits piers over 1500mm high. Using 3mm Corten Steel for the face panel and a stainless steel standard housing insert that’s 350mm Deep. The face panel attaches to the secure housing insert after your brickwork is acid washed, rendered or installed into a timber or metal fence with internal concealed fixings. Other depth housings are optional extras also made from 316 Stainless Steel, the housings have an internal shelf to divide mail from the paper hole.

Example pictures font is ARIAL BOLD

The CORTEN ATLANTIC is a available with your NUMBER only or ADDRESSED whatever you prefer?

PLEASE NOTE : The Corten metal will be supplied RAW and will look like normal steel and will weather over time, the example pictures are panels that have weathered for about 3 months and will go darker over time. The metal will also bleed when weathering so if its going on to a light rendered surface we strongly recommend that you weather the face panel before installing.

• 3mm CORTEN Steel
• 350mm Brushed 316 Stainless Steel Housing Box (as standard)
• Face panel 300mm wide x 450mm high
• Standard 225mm x 27.5mm letter slot
• 225mm x 40mm letter slot with Rainhood
• Laser cut NUMBER or ADDRESS to face panel
• Black 2mm Acrylic backing to face panel to highlight text
• 95mm diameter paper hole
• LEAD TIME: Approx 5-7 working days

PLEASE NOTE :

Text or Numbering – We will laser cut exactly as you write it (example : 32 beach road will be written all in lowercase for the text) so firstly double check your number and/or address is correct and it’s written exactly as you want it, Capital then lowercase , all caps or all lowercase

Our Housing Inserts are a stainless sheetmetal box that is folded and spot welded together. They are NOT structural and while our letterboxes are predominantly manufactured for brick or blockwork many of our clients install into various Timber and Metal fences. If this is the case you will see some Spot Welds to the sides of the housing Insert.

All out numbering and text is LASER CUT from the face panel and with a backing panel which means some text and numbers with have “Bridging” (eg, 0,6,9 B,D, etc) to hold the centers on place, we cannot supply without this bridging.

With all our letterboxes we have open slots with or without an optional Rainhood for added protection (Auspost don’t like springflaps for OHS reasons) but we do not guarantee that water will not ingress especially with wind and rain, if you require a fully watertight mailbox then please do not purchase from us.